Lowongan Kerja ENI Indonesia Juli 2020

Rekrutmen.NET   19.37.00   D3, Jakarta, S1  

Eni  merjpakan perusahaan multinasional Italia yang bergerak di bidang eksplorasi dan produksi minyak dan gas bumi. Saat ini, Eni berada di 70 Negara dan memiliki 76.000 karyawan (2007). Sahamnya diperdagangkan di Bursa Saham Italia dan juga Bursa Saham New York. Saat ini, Eni merupakan perusahaan milik pemerintah Italia terbesar. Eni mulai diprivatisasi sejak tahun 1995 dengan penjualan 14,7 persen sahamnya ke publik.

Saat ini Eni kembali membuka lowongan kerja terbaru sbb:

Posisi:

1. Offshore Subsea Control Residence Engineer
Purpose:

• Reporting to the Maintenance Supervisor, the Offshore Subsea Control Residence Engineer is responsible to define appropriate subsea control field maintenance policies and procedures including subsea control advise to maximize the Operations’ efficiency of Eni’s Jangkrik facilities
• Offshore Subsea Specialist activities will be conducted in safe manner with maximizing field production efficiency, while minimizing the total maintenance cost (production downtime, spare parts, man power, etc.) and meet daily production targets whilst complying with company guidelines and legal requirements

Main Accountabilities and Responsibilities:

• Implement Subsea System maintenance and integrity program for surface and topside facilities to maintain availability and reliability target. To coordinate with FPU Sr. E&I engineer and Sr. Mechanical Engineer for topside facilities work.
• Provide subsea control engineering supervision to field operations.
• Proactively identify and develop ideas for improvements to the Subsea system that can add value to the asset.
• Provide operations subsea control input and support to future field development.
• Engineer and design subsea control modifications to gas plant and offshore facilities.
• Develop technical skills to improve capabilities.
• Provide early troubleshooting in case of anomalies and participate in Root Cause Analysis for significant equipment failures.
• Develop operating procedures and guidelines.
• Managing relevant reporting and administration work based on the needs of the respective organization (including data recording, correspondence, etc)
• Coordinating subsea engineering advice and support to maximize operation’s efficiency.
• Assist with preparation of short term and long term production forecasting.
• Assist in preparation and maintenance of annual operation’s team budget.
• Improve existing techniques for reporting production efficiency. Provide feedback on subsea asset performance to senior management, business partners and government.
• Create profiles with subsurface to confirm future facility capacity requirements.
• Demonstrate appropriate safety behaviours and commitment to environmental policies.
• Ensure production activities are carried out in compliance with all relevant procedures and legal requirements.
• Using experience and knowledge to lead investigate and rectify operational problems.
• Proactively analyse field data and develop action plans to improve production performance that can add value to the asset through improved reliability and uptime.
• Ensure safe start-up and shutdown of process facilities.
• Progress all MOC (Management of Change)’s including gaining technical and budgetary approval and interfacing with facility and Project Engineering, ensuring that all changes to equipment design, type or functions are controlled by application of applicable company Management of Change procedure.
• Develop Subsea Plant Operating Procedures and guidelines for all Jangkrik subsea operation facility.
• Ensure that all operation tasks are carried out according to Company’s established policies, procedures and professional standards.
• Ensure appropriate risk assessments are carried out for all operation activities, with particular attention to recognize the impact of change.
• Apply the lessons learned from design reviews, receiving inspections, and risk management findings and support team performance by sharing knowledge and best practices.

Main Interfaces

Internal:

• Operations HSE
• Maintenance team
• Operations team
• Subsea Engineering Team and Manager

External

• Contractor Project Manager
• Local authorities
• Vendors 

Qualifications & Experience

Education:

• D3 / Polytechnic degree major in Instrumentation, Control or Electrical Engineering
• Engineering degree (preferred) major in Automation or Electrical engineering.

Experience:

• 5 years of Oil & Gas Industry experience specific in Subsea production system installation, service and operation.
• Experience in the use of application of Subsea software
• Experienced in operation for offshore gas facilities is beneficially

Language:

• Fluent in English and Bahasa Indonesia

2. Health, Safety and Environment (HSE)

• Comply with requirements of the Safety, Health and Environmental laws of Indonesia and obey the corporate policy of Eni Indonesia on Safety, Health and Environment, and to practice Eni Indonesia Safety Systems.
• Provide and maintain safe and healthy conditions of work to subordinate personnel and control over the compliance by the personnel all safety and labour protection rules and regulations
• HSES awareness in all duties and activities / compliance enforcement with general HSES rules

Required Competencies

Technical:

• Gas processing and operation technology
• Familiar with the subsea control design and philosophy in particular Master Control Station (MCS), alarms and trending on MCS operation from HMI, architecture of MCS-DCS and interface with the ESD system, and system backup
• Extensive experience and exposure to Root Cause Analysis and troubleshooting of operational equipment with state of the art diagnostic techniques.
• Experience in the design, installation, commissioning and operations of subsea control system.
• Knowledge of subsea system, ORF and Offshore operations desired.
• Wells and facility pre-commissioning, commissioning, and start-up experienced.
• Production Operations: Maintenance Management, Predictive / Corrective Maintenance, Operation / Maintenance Advising.
• Maintenance Engineering: CMMS Activities, Maintenance Engineering, Maintenance System Auditing, Maintenance Advising in Project Phase, Reliability / Availability analysis techniques knowledge, Maintenance systems and policies knowledge.
• Organization Processes: Local legislation, Internal Standard, Feedback development and diffusion, Technical Audit and Design review, Documentation Management.
• Support and Technologies: Standard ISO, TQM and Quality System, Technical requirement and Standard.
• Compliance: Local / National and International Standard and Codes, Health, Safety, Environment, Quality.
• Capable in terms of the operation / maintenance management of Oil & Gas Platforms offshore or Onshore receiving Processing Facility.
• Familiar with P&ID, PFD, Cause & Effect Matrix.
• Capable in PLC and Scada system is an advantage

Training and Certification:

• Employment Induction including HSE Awareness
• T-BOSIET (1st time) or T-FOET (refreshment)

Personalities:

• Integrity & values
• Driving for results
• Value Creation Focus
• Teamwork & cooperation
• Initiative
• Analytical thinking
• Information seeking
• Concern for order
• Team player
• Working Conditions
• Offshore (Rotational)

3. Turbomachinery Specialist
Purpose:

• To drive improvement of availability, reliability & health of Major Rotating (Gas Turbine) equipment and thereby reducing facility deferment and maintenance cost. Reporting to Maintenance Supervisor, the turbomachinery specialist is responsible to maintain gas turbine and auxiliary equipment work properly as daily basis to the deliver gas from Jangkrik Complex facility, by performing Company maintenance strategy (PM, PDM and CM) as per CMMS
• Main Accountabilities and Responsibilities
• To Monitor and maintaining gas turbine including auxiliary equipment in performance operating context and troubleshooting if any problem related to Control, electrical, instrument and minor portion of mechanical issue.
• Competent in sequence start-up of turbomachinery to comply with operational and maintenance procedures. To be familiar with Control of Turbine including sequences control, Fuel control, air flow control and protection system of Turbines.
• Monitoring Turbomachinery and its accessories system for lube oil system, fuel system, air system, seal gas system, fire and gas system and ventilation system. Understand turbomachinery anatomy and working principles.
• Monitor the performance of the equipment and report if any anomalies and first level breakdown indication. lead mini-midi and maxi RCA for any unit tripped to prevent repetitive failure in the near future.
• To conduct maintenance planning, pre-Outage and post-Outage planning activities
• To reviews of maintenance activities subject to applicable technical specification.
• To develop maintenance schedules, which optimize reliability and availability.
• To maintain a documented history of all changes or modifications;
• To performed diagnosing and resolving maintenance or operational problems;
• To carry out data collection activity: failure mode occurred, downtime, preventive and corrective maintenance activity duration;
• Interface with support (Company Maintenance Support and HQ Turbomachinery) and Vendor manufacturing of Engine and Compressor / Generator (GE / Solar)
• To perform Turbomachinery KPI analysis (turbomachinery reliability and availability, spare parts inventory)
• To provide Turbomachinery spare part Management optimizing stock quantity in store.
• Lead Major Maintenance activities such as engine Change out, PT inspection and replacement, Generator & Compressor replacement.
• Support to Equipment Championship program for turbomachinery (Equipment Issue Register, Identify Consumable and Critical Spare Part, Consumable and Critical Spare Part Availability and Sharing knowledge / Lesson Learn)
• Familiar in areas of Rotating Equipment discipline; examples of which are: turbines, vibration analysis, dry gas seals, codes and standards, performance, compressors, , manufacturing, field installation
• Extensive experience and exposure to “hands-on” work on the inspection, disassembly and re-assembly of rotating equipment. This includes balancing, alignment and borescope inspections.
• Extensive experience and exposure to root cause analysis and troubleshooting of rotating equipment with state of the art diagnostic techniques and instrumentation
• Knowledge of gas plant and offshore operations essential
• Troubleshoot, rotating equipment problems, plan repair and refurbishment work as required

Main Interfaces

Internal:

• Operations HSE
• Maintenance team
• Operations team
• Subsea Engineering Team and Manager

External:

• Contractor Project Manager
• Local authorities
• Vendors 

Qualifications & Experience

Education:

• Degree in D3 or S1 Mechanical Engineering, Electrical Enginnering, Physics Engineering or related.

Experience:

• 3+ years of hands-on experience on GE Aero derivative machines & their control systems.
• Safety leadership - a role model for personal and process safety.
• Know the basics of the oil and gas industry, source and composition of hydrocarbons, overall value chain and the environmental impact caused by the industry.
• Knowledge of rotating equipment in oil and gas industry best practices and methodologies, of Turbomachinery
• Working knowledge of mechanics (kinematics, dynamics), thermodynamics, fluid dynamics, strength and properties of materials, root cause analysis and predictive analytics.
• Familiarity codes and standards, Company technical specification; such as API 616 & ASME PTC 22 (Gas Turbines for petroleum, Chemical & Gas Industry services)
• Capable in CMMS SAP maintenance related with work order, job planning, and materials ordering, etc.

Language:

• Fluent in English and Bahasa Indonesia

4. Health, Safety and Environment (HSE)

• Comply with requirements of the Safety, Health and Environmental laws of Indonesia and obey the corporate policy of Eni Indonesia on Safety, Health and Environment, and to practice Eni Indonesia Safety Systems.
• Provide and maintain safe and healthy conditions of work to subordinate personnel and control over the compliance by the personnel all safety and labour protection rules and regulations
• HSES awareness in all duties and activities / compliance enforcement with general HSES rules

Required Competencies:

• Strong interpersonal and organizational skills with ability to lead diverse organizations.
• Good knowledge of GE LM2500 unit. Know the company's code of corporate governance practices and the supporting corporate governance strategy and the purpose, legal impositions, personal obligations and corporate obligations associated with good corporate governance.
• A depth of relevant experience with maintenance programs for GE Aero-derivative Gas Turbines sets and all related, off base related auxiliary equipment.
• Capable in terms of the maintenance management of Oil & Gas Platforms offshore.
• Familiar with Mark VIE Logic and configuration for turbine control system
• Familiar with Triconex logic and configuration for fire and gas system
• Familiar with Bently Nevada logic and configuration for condition monitoring system
• Familiar with RSLogix logic configuration
• Familiar with Eagle Quantum logic configuration
• Good knowledge of Opticomp sytem and diagnostic alarm

Personalities:

• Demonstrate consistently high levels of performance
• Know how to develop and maintain effective working relationships with colleagues, supervisors and visitors and communicate using both oral and written methods. 
• Understand the role of corporate compliance in maintaining a culture of trust and integrity. Follow corporate compliance policies and procedures.
• In Awareness of external support resources to assist the work plan execution; identify & liaise with vendor or contact person that can provide required capability.
• Compliance: Local / National and International Standard and Codes, Health, Safety, Environment, Quality.
• Managing relevant reporting and administration work based on the needs of the respective organization (including data recording, correspondence, etc. - based on the function of this position).
• Ensuring the confidentiality of the company’s documentation

Core Competencies:

• Integrity & values
• Driving for results
• Value Creation Focus
• Teamwork & Cooperation
• Initiative

Managerial Competencies:

• Leading Change
• Leading People
• Developing Others

Functional Competencies:

• Analytical thinking
• Information seeking
• Concern for order
• Self Confidence
• Manage respective people and organization
• Participate in training operations, maintenance and engineering personnel
• Established global network for contacts in the Rotating Equipment discipline
• Excellent verbal and written English communication skills
• Develop technical skills of self and others to improve capabilities.
• Manage EHS function in the respective department
• Demonstrate appropriate safety behaviours and commitment to environmental policies
• Emergency response duties as required
• Compliance with environmental regulations and targets

Working Conditions:

• Offshore (rotational)
• Standing 50%, Sitting 50%

Bagi Anda yang berminat, silahkan melakukan pendaftaran ke alamat email berikut:
Recruitment.id@eni.com
Subject email: Apply for (position title).
Paling lambat 16 July 2020