Rekrutmen.NET - Eni Indonesia adalah anak perusahaan Eni
dari Italia yang amerupakan Kontraktor Kontrak Kerja Sama (KKKS) yang
ditunjuk BPMIGAS untuk melakukan eksplorasi dan produksi minyak dan gas
bumi di Indonesia.
Eni mulai beroperasi di Indonesia sejak tahun 2000. Aktivitas produksinya dikonsentrasikan di pulau Kalimantan (Borneo) di Blok Sanga-Sanga PSC di mana Eni memiliki 37,81% saham dengan sisanya dimiliki oleh Virginia Indonesia Co (VICO). Area tersebut terutama memproduksi gas alam yang hasilnya dikirimkan ke PT Badak NGL, sebuah pabrik penghasil LNG (Liquid Natural Gas) dan LPG (Liquid Petroleum Gas) di Bontang.
Aktivitas eksplorasi Eni difokuskan di lepas pantai (deep water/laut dalam) Kalimantan Timur. Eni memiliki participating interest di delapan lokasi di dua cekungan minyak Kutai dan Tarakan. Empat lokasi (Muara Bakau, Ambalat, Bukat dan Bulungan) dimiliki dengan persentase 41.25% hingga 100%, sedangkan empat lainnya (Ganal, Rapak, Popodi, Papalang) dengan persentase 20% hingga 37.8%.
POSISI :
WELDING ENGINEER (PDV-01)
Qualifications & Experience:
- Degree in Mechanical Engineering or equivalent (Material and Welding)
- Fluent in English
- At least 10 years’ experience as Material and Welding engineer
Required Competencies:
- Asset Integrity Management System
- Oil & Gas surface Production facilities course.
- Project Engineering Overview in Oil & Gas Industry
- Introduction to Construction Management
- HSE Management in Eni upstream operations
- Petroleum Engineering
- Production Optimization Technologies
- Hazard Identification course
- Hydrocarbon Lifecycle
- Energy Efficiency
- Cathodic Protection in Onshore and Offshore Installations
- Corrosion and Corrosion Control in the Oil & Gas Industry
- Subsea Systems & Offshore Structures Overview
- PED Directive
- EWE Certification
- Certified International Welding Engineer (IWE) according to International Institute of Welding or AWS B5.16
Required Knowledge:
Professional Role general knowledge
• Material and Corrosion Design
• Mechanical, Machinery and Piping Engineering
• Plant Design
• Pipeline Engineering
• Flow Assurance
• Naval Engineering
• Innovative Technologies
Knowledge from other Prof. Areas
• HSE Principles and Systems
• Production Operations
• Construction Works
Business Line Specific Skills
Upstream:
• Offshore Engineering
• SURF and SPS
• Drilling & Well Completion Activities
Required personal capabilities:
Knowledge and know-how: Analysis, Problem Solving, Results orientation
Teamwork: Teamwork
Passion - Setting an example: Positive attitude, Energy
Courage to change: Flexibility / lateral thinking
Health, Safety and Environment (HSE)
- Comply with rules and standards described in Company Policies, HSE Integrated Management System and Procedures
- Report all incidents
- Motivate staff and colleagues to comply with HSE rules and standards
- Participate in HSE related initiatives
MATERIAL ENGINEER (PDV-02)
Qualifications & Experience:
• Degree in Mechanical Engineering or equivalent (Material and Welding)
• Fluent in English
• At least 10 years’ experience as Material and Welding engineer
Required Competencies:
- Asset Integrity Management System
- Oil & Gas surface Production facilities course.
- Project Engineering Overview in Oil & Gas Industry
- Introduction to Construction Management
- HSE Management in Eni upstream operations
- Petroleum Engineering
- Production Optimization Technologies
- Hazard Identification course
- Hydrocarbon Lifecycle
- Energy Efficiency
- Cathodic Protection in Onshore and Offshore Installations
- Corrosion and Corrosion Control in the Oil & Gas Industry
- Subsea Systems & Offshore Structures Overview
- PED Directive
- EWE Certification
- Certified International Welding Engineer (IWE) according to International Institute of Welding or AWS B5.16
Required Knowledge:
Professional Role general knowledge
• Material and Corrosion Design
• Mechanical, Machinery and Piping Engineering
• Plant Design
• Pipeline Engineering
• Flow Assurance
• Naval Engineering
• Innovative Technologies
Knowledge from other Prof. Areas
• HSE Principles and Systems
• Production Operations
• Construction Works
Business Line Specific Skills
Upstream:
• Offshore Engineering
• SURF and SPS
• Drilling & Well Completion Activities
Required personal capabilities:
Knowledge and know-how: Analysis, Problem Solving, Results orientation
Teamwork: Teamwork
Passion - Setting an example: Positive attitude, Energy
Courage to change: Flexibility / lateral thinking
Health, Safety and Environment (HSE)
- Comply with rules and standards described in Company Policies, HSE Integrated
- Management System and Procedures
- Report all incidents
- Motivate staff and colleagues to comply with HSE rules and standards
- Participate in HSE related initiatives
Should you are interested with the position & meet the qualifications required, please send only your latest resume (in MS Word or PDF format with size no more than 1 MB) to:
Recruitment.id@eni.com
(Please mention the position title on the email subject: Apply for (name/position code)
Please note that applications may not be reviewed if received after 8 March 2019 . We regret that only shortlisted candidates will be notified.
Eni mulai beroperasi di Indonesia sejak tahun 2000. Aktivitas produksinya dikonsentrasikan di pulau Kalimantan (Borneo) di Blok Sanga-Sanga PSC di mana Eni memiliki 37,81% saham dengan sisanya dimiliki oleh Virginia Indonesia Co (VICO). Area tersebut terutama memproduksi gas alam yang hasilnya dikirimkan ke PT Badak NGL, sebuah pabrik penghasil LNG (Liquid Natural Gas) dan LPG (Liquid Petroleum Gas) di Bontang.
Aktivitas eksplorasi Eni difokuskan di lepas pantai (deep water/laut dalam) Kalimantan Timur. Eni memiliki participating interest di delapan lokasi di dua cekungan minyak Kutai dan Tarakan. Empat lokasi (Muara Bakau, Ambalat, Bukat dan Bulungan) dimiliki dengan persentase 41.25% hingga 100%, sedangkan empat lainnya (Ganal, Rapak, Popodi, Papalang) dengan persentase 20% hingga 37.8%.
POSISI :
WELDING ENGINEER (PDV-01)
Qualifications & Experience:
- Degree in Mechanical Engineering or equivalent (Material and Welding)
- Fluent in English
- At least 10 years’ experience as Material and Welding engineer
Required Competencies:
- Asset Integrity Management System
- Oil & Gas surface Production facilities course.
- Project Engineering Overview in Oil & Gas Industry
- Introduction to Construction Management
- HSE Management in Eni upstream operations
- Petroleum Engineering
- Production Optimization Technologies
- Hazard Identification course
- Hydrocarbon Lifecycle
- Energy Efficiency
- Cathodic Protection in Onshore and Offshore Installations
- Corrosion and Corrosion Control in the Oil & Gas Industry
- Subsea Systems & Offshore Structures Overview
- PED Directive
- EWE Certification
- Certified International Welding Engineer (IWE) according to International Institute of Welding or AWS B5.16
Required Knowledge:
Professional Role general knowledge
• Material and Corrosion Design
• Mechanical, Machinery and Piping Engineering
• Plant Design
• Pipeline Engineering
• Flow Assurance
• Naval Engineering
• Innovative Technologies
Knowledge from other Prof. Areas
• HSE Principles and Systems
• Production Operations
• Construction Works
Business Line Specific Skills
Upstream:
• Offshore Engineering
• SURF and SPS
• Drilling & Well Completion Activities
Required personal capabilities:
Knowledge and know-how: Analysis, Problem Solving, Results orientation
Teamwork: Teamwork
Passion - Setting an example: Positive attitude, Energy
Courage to change: Flexibility / lateral thinking
Health, Safety and Environment (HSE)
- Comply with rules and standards described in Company Policies, HSE Integrated Management System and Procedures
- Report all incidents
- Motivate staff and colleagues to comply with HSE rules and standards
- Participate in HSE related initiatives
MATERIAL ENGINEER (PDV-02)
Qualifications & Experience:
• Degree in Mechanical Engineering or equivalent (Material and Welding)
• Fluent in English
• At least 10 years’ experience as Material and Welding engineer
Required Competencies:
- Asset Integrity Management System
- Oil & Gas surface Production facilities course.
- Project Engineering Overview in Oil & Gas Industry
- Introduction to Construction Management
- HSE Management in Eni upstream operations
- Petroleum Engineering
- Production Optimization Technologies
- Hazard Identification course
- Hydrocarbon Lifecycle
- Energy Efficiency
- Cathodic Protection in Onshore and Offshore Installations
- Corrosion and Corrosion Control in the Oil & Gas Industry
- Subsea Systems & Offshore Structures Overview
- PED Directive
- EWE Certification
- Certified International Welding Engineer (IWE) according to International Institute of Welding or AWS B5.16
Required Knowledge:
Professional Role general knowledge
• Material and Corrosion Design
• Mechanical, Machinery and Piping Engineering
• Plant Design
• Pipeline Engineering
• Flow Assurance
• Naval Engineering
• Innovative Technologies
Knowledge from other Prof. Areas
• HSE Principles and Systems
• Production Operations
• Construction Works
Business Line Specific Skills
Upstream:
• Offshore Engineering
• SURF and SPS
• Drilling & Well Completion Activities
Required personal capabilities:
Knowledge and know-how: Analysis, Problem Solving, Results orientation
Teamwork: Teamwork
Passion - Setting an example: Positive attitude, Energy
Courage to change: Flexibility / lateral thinking
Health, Safety and Environment (HSE)
- Comply with rules and standards described in Company Policies, HSE Integrated
- Management System and Procedures
- Report all incidents
- Motivate staff and colleagues to comply with HSE rules and standards
- Participate in HSE related initiatives
Should you are interested with the position & meet the qualifications required, please send only your latest resume (in MS Word or PDF format with size no more than 1 MB) to:
Recruitment.id@eni.com
(Please mention the position title on the email subject: Apply for (name/position code)
Please note that applications may not be reviewed if received after 8 March 2019 . We regret that only shortlisted candidates will be notified.
